configure

  tmp=./conf$$-$RANDOM
  (umask 077 && mkdir "$tmp")
} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
ac_tmp=$tmp

# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
# This happens for instance with `./config.status config.h'.
if test -n "$CONFIG_FILES"; then


ac_cr=`echo X | tr X '\015'`
# On cygwin, bash can eat \r inside `` if the user requested igncr.
# But we know of no other shell where ac_cr would be empty at this
# point, so we can use a bashism as a fallback.
if test "x$ac_cr" = x; then
  eval ac_cr=\$\'\\r\'
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
  ac_cs_awk_cr='\\r'
else
  ac_cs_awk_cr=$ac_cr
fi

echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
_ACEOF


{
  echo "cat >conf$$subs.awk <<_ACEOF" &&
  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
  echo "_ACEOF"
} >conf$$subs.sh ||
  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
  . ./conf$$subs.sh ||
    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5

  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
  if test $ac_delim_n = $ac_delim_num; then
    break
  elif $ac_last_try; then
    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
  else
    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
  fi
done
rm -f conf$$subs.sh

cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
sed -n '
h
s/^/S["/; s/!.*/"]=/
p
g
s/^[^!]*!//
:repl
t repl
s/'"$ac_delim"'$//
t delim
:nl
h
s/\(.\{148\}\)..*/\1/
t more1
s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
p
n
b repl
:more1
s/["\\]/\\&/g; s/^/"/; s/$/"\\/
p
g
s/.\{148\}//
t nl
:delim
h
s/\(.\{148\}\)..*/\1/
t more2
s/["\\]/\\&/g; s/^/"/; s/$/"/
p
b
:more2
s/["\\]/\\&/g; s/^/"/; s/$/"\\/
p
g
s/.\{148\}//
t delim
' <conf$$subs.awk | sed '
/^[^""]/{
  N
  s/\n//
}
' >>$CONFIG_STATUS || ac_write_fail=1
rm -f conf$$subs.awk
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACAWK
cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
  for (key in S) S_is_set[key] = 1
  FS = ""

}
{
  line = $ 0
  nfields = split(line, field, "@")
  substed = 0
  len = length(field[1])
  for (i = 2; i < nfields; i++) {
    key = field[i]
    keylen = length(key)
    if (S_is_set[key]) {
      value = S[key]
      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
      len += length(value) + length(field[++i])
      substed = 1
    } else
      len += 1 + keylen
  }

  print line
}

_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
  cat
fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
_ACEOF

# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
h
s///
s/^/:/
s/[	 ]*$/:/
s/:\$(srcdir):/:/g
s/:\${srcdir}:/:/g
s/:@srcdir@:/:/g
s/^:*//
s/:*$//
x
s/\(=[	 ]*\).*/\1/
G
s/\n//
s/^[^=]*=[	 ]*$//
}'
fi

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
fi # test -n "$CONFIG_FILES"

# Set up the scripts for CONFIG_HEADERS section.
# No need to generate them if there are no CONFIG_HEADERS.
# This happens for instance with `./config.status Makefile'.
if test -n "$CONFIG_HEADERS"; then
cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
BEGIN {
_ACEOF

# Transform confdefs.h into an awk script `defines.awk', embedded as
# here-document in config.status, that substitutes the proper values into
# config.h.in to produce config.h.

# Create a delimiter string that does not exist in confdefs.h, to ease
# handling of long lines.
ac_delim='%!_!# '
for ac_last_try in false false :; do
  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
  if test -z "$ac_tt"; then
    break
  elif $ac_last_try; then
    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
  else
    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
  fi
done

# For the awk script, D is an array of macro values keyed by name,
# likewise P contains macro parameters if any.  Preserve backslash
# newline sequences.

ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
sed -n '
s/.\{148\}/&'"$ac_delim"'/g
t rset
:rset
s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
t def
d
:def
s/\\$//
t bsnl
s/["\\]/\\&/g
s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
D["\1"]=" \3"/p
s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
d
:bsnl
s/["\\]/\\&/g
s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
D["\1"]=" \3\\\\\\n"\\/p
t cont
s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
t cont
d
:cont
n
s/.\{148\}/&'"$ac_delim"'/g
t clear
:clear
s/\\$//
t bsnlc
s/["\\]/\\&/g; s/^/"/; s/$/"/p
d
:bsnlc
s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
b cont
' <confdefs.h | sed '
s/'"$ac_delim"'/"\\\
"/g' >>$CONFIG_STATUS || ac_write_fail=1

cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
  for (key in D) D_is_set[key] = 1
  FS = ""
}
/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
  line = \$ 0
  split(line, arg, " ")
  if (arg[1] == "#") {
    defundef = arg[2]
    mac1 = arg[3]
  } else {
    defundef = substr(arg[1], 2)
    mac1 = arg[2]
  }
  split(mac1, mac2, "(") #)
  macro = mac2[1]
  prefix = substr(line, 1, index(line, defundef) - 1)
  if (D_is_set[macro]) {
    # Preserve the white space surrounding the "#".
    print prefix "define", macro P[macro] D[macro]
    next
  } else {
    # Replace #undef with comments.  This is necessary, for example,
    # in the case of _POSIX_SOURCE, which is predefined and required
    # on some systems where configure will not decide to define it.
    if (defundef == "undef") {
      print "/*", prefix defundef, macro, "*/"
      next
    }
  }
}
{ print }
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"


eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
shift
for ac_tag
do
  case $ac_tag in
  :[FHLC]) ac_mode=$ac_tag; continue;;
  esac
  case $ac_mode$ac_tag in
  :[FHL]*:*);;
  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
  :[FH]-) ac_tag=-:-;;
  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
  esac
  ac_save_IFS=$IFS
  IFS=:
  set x $ac_tag
  IFS=$ac_save_IFS
  shift
  ac_file=$1
  shift

  case $ac_mode in
  :L) ac_source=$1;;
  :[FH])
    ac_file_inputs=
    for ac_f
    do
      case $ac_f in
      -) ac_f="$ac_tmp/stdin";;
      *) # Look for the file first in the build tree, then in the source tree
	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
	 # because $ac_f cannot contain `:'.
	 test -f "$ac_f" ||
	   case $ac_f in
	   [\\/$]*) false;;
	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
	   esac ||
	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
      esac
      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
      as_fn_append ac_file_inputs " '$ac_f'"
    done

    # Let's still pretend it is `configure' which instantiates (i.e., don't
    # use $as_me), people would be surprised to read:
    #    /* config.h.  Generated by config.status.  */
    configure_input='Generated from '`
	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
	`' by configure.'
    if test x"$ac_file" != x-; then
      configure_input="$ac_file.  $configure_input"
      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
    fi
    # Neutralize special characters interpreted by sed in replacement strings.
    case $configure_input in #(
    *\&* | *\|* | *\\* )
       ac_sed_conf_input=`$as_echo "$configure_input" |
       sed 's/[\\\\&|]/\\\\&/g'`;; #(
    *) ac_sed_conf_input=$configure_input;;
    esac

    case $ac_tag in
    *:-:* | *:-) cat >"$ac_tmp/stdin" \
      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
    esac
    ;;
  esac

  ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
  as_dir="$ac_dir"; as_fn_mkdir_p
  ac_builddir=.

case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
  # A ".." for each directory in $ac_dir_suffix.
  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
  case $ac_top_builddir_sub in
  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
  esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix

case $srcdir in
  .)  # We are building in place.
    ac_srcdir=.
    ac_top_srcdir=$ac_top_builddir_sub
    ac_abs_top_srcdir=$ac_pwd ;;
  [\\/]* | ?:[\\/]* )  # Absolute name.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir
    ac_abs_top_srcdir=$srcdir ;;
  *) # Relative name.
    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_build_prefix$srcdir
    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix


  case $ac_mode in
  :F)
  #
  # CONFIG_FILE
  #

  case $INSTALL in
  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
  esac
  ac_MKDIR_P=$MKDIR_P
  case $MKDIR_P in
  [\\/$]* | ?:[\\/]* ) ;;
  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
  esac
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
ac_sed_dataroot='
/datarootdir/ {
  p
  q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
  ac_datarootdir_hack='
  s&@datadir@&$datadir&g
  s&@docdir@&$docdir&g
  s&@infodir@&$infodir&g
  s&@localedir@&$localedir&g
  s&@mandir@&$mandir&g
  s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF

# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_sed_extra="$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s|@configure_input@|$ac_sed_conf_input|;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@top_build_prefix@&$ac_top_build_prefix&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5

test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
      "$ac_tmp/out"`; test -z "$ac_out"; } &&
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined" >&2;}

  rm -f "$ac_tmp/stdin"
  case $ac_file in
  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
  esac \
  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 ;;
  :H)
  #
  # CONFIG_HEADER
  #
  if test x"$ac_file" != x-; then
    {
      $as_echo "/* $configure_input  */" \
      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
    } >"$ac_tmp/config.h" \
      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
    else
      rm -f "$ac_file"
      mv "$ac_tmp/config.h" "$ac_file" \
	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
    fi
  else
    $as_echo "/* $configure_input  */" \
      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
      || as_fn_error $? "could not create -" "$LINENO" 5
  fi
# Compute "$ac_file"'s index in $config_headers.
_am_arg="$ac_file"
_am_stamp_count=1
for _am_header in $config_headers :; do
  case $_am_header in
    $_am_arg | $_am_arg:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
done
echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$_am_arg" : 'X\(//\)[^/]' \| \
	 X"$_am_arg" : 'X\(//\)$' \| \
	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$_am_arg" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`/stamp-h$_am_stamp_count
 ;;

  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
$as_echo "$as_me: executing $ac_file commands" >&6;}
 ;;
  esac


  case $ac_file$ac_mode in
    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
  # Older Autoconf quotes --file arguments for eval, but not when files
  # are listed without --file.  Let's play safe and only enable the eval
  # if we detect the quoting.
  case $CONFIG_FILES in
  *\'*) eval set x "$CONFIG_FILES" ;;
  *)   set x $CONFIG_FILES ;;
  esac
  shift
  for mf
  do
    # Strip MF so we end up with the name of the file.
    mf=`echo "$mf" | sed -e 's/:.*$//'`
    # Check whether this is an Automake generated Makefile or not.
    # We used to match only the files named 'Makefile.in', but
    # some people rename them; so instead we look at the file content.
    # Grep'ing the first line is not enough: some people post-process
    # each Makefile.in and add a new line on top of each file to say so.
    # Grep'ing the whole file is not good either: AIX grep has a line
    # limit of 2048, but all sed's we know have understand at least 4000.
    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
      dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$mf" : 'X\(//\)[^/]' \| \
	 X"$mf" : 'X\(//\)$' \| \
	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$mf" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
    else
      continue
    fi
    # Extract the definition of DEPDIR, am__include, and am__quote
    # from the Makefile without running 'make'.
    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
    test -z "$DEPDIR" && continue
    am__include=`sed -n 's/^am__include = //p' < "$mf"`
    test -z "$am__include" && continue
    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
    # Find all dependency output files, they are included files with
    # $(DEPDIR) in their names.  We invoke sed twice because it is the
    # simplest approach to changing $(DEPDIR) to its actual value in the
    # expansion.
    for file in `sed -n "
      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
      # Make sure the directory exists.
      test -f "$dirpart/$file" && continue
      fdir=`$as_dirname -- "$file" ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$file" : 'X\(//\)[^/]' \| \
	 X"$file" : 'X\(//\)$' \| \
	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
      as_dir=$dirpart/$fdir; as_fn_mkdir_p
      # echo "creating $dirpart/$file"
      echo '# dummy' > "$dirpart/$file"
    done
  done
}
 ;;
    "libtool":C)

    # See if we are running on zsh, and set the options that allow our
    # commands through without removal of \ escapes.
    if test -n "${ZSH_VERSION+set}"; then
      setopt NO_GLOB_SUBST
    fi

    cfgfile=${ofile}T
    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
    $RM "$cfgfile"

    cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.

# Provide generalized library-building support services.
# Written by Gordon Matzigkeit, 1996

# Copyright (C) 2014 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of of the License, or
# (at your option) any later version.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program or library that is built
# using GNU Libtool, you may include this file under the  same
# distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.


# The names of the tagged configurations supported by this script.
available_tags=''

# Configured defaults for sys_lib_dlsearch_path munging.
: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}

# ### BEGIN LIBTOOL CONFIG

# Which release of libtool.m4 was used?
macro_version=$macro_version
macro_revision=$macro_revision

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to build static libraries.
build_old_libs=$enable_static

# What type of objects to build.
pic_mode=$pic_mode

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# Shared archive member basename,for filename based shared library versioning on AIX.
shared_archive_member_spec=$shared_archive_member_spec

# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL

# An echo program that protects backslashes.
ECHO=$lt_ECHO

# The PATH separator for the build system.
PATH_SEPARATOR=$lt_PATH_SEPARATOR

# The host system.
host_alias=$host_alias
host=$host
host_os=$host_os

# The build system.
build_alias=$build_alias
build=$build
build_os=$build_os

# A sed program that does not truncate output.
SED=$lt_SED

# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="\$SED -e 1s/^X//"

# A grep program that handles long lines.
GREP=$lt_GREP

# An ERE matcher.
EGREP=$lt_EGREP

# A literal string matcher.
FGREP=$lt_FGREP

# A BSD- or MS-compatible name lister.
NM=$lt_NM

# Whether we need soft or hard links.
LN_S=$lt_LN_S

# What is the maximum length of a command?
max_cmd_len=$max_cmd_len

# Object file suffix (normally "o").
objext=$ac_objext

# Executable file suffix (normally "").
exeext=$exeext

# whether the shell understands "unset".
lt_unset=$lt_unset

# turn spaces into newlines.
SP2NL=$lt_lt_SP2NL

# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP

# convert \$build file names to \$host format.
to_host_file_cmd=$lt_cv_to_host_file_cmd

# convert \$build files to toolchain format.
to_tool_file_cmd=$lt_cv_to_tool_file_cmd

# An object symbol dumper.
OBJDUMP=$lt_OBJDUMP

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method

# Command to use when deplibs_check_method = "file_magic".
file_magic_cmd=$lt_file_magic_cmd

# How to find potential files when deplibs_check_method = "file_magic".
file_magic_glob=$lt_file_magic_glob

# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
want_nocaseglob=$lt_want_nocaseglob

# DLL creation program.
DLLTOOL=$lt_DLLTOOL

# Command to associate shared and link libraries.
sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd

# The archiver.
AR=$lt_AR

# Flags to create an archive.
AR_FLAGS=$lt_AR_FLAGS

# How to feed a file listing to the archiver.
archiver_list_spec=$lt_archiver_list_spec

# A symbol stripping program.
STRIP=$lt_STRIP

# Commands used to install an old-style archive.
RANLIB=$lt_RANLIB
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds

# Whether to use a lock for old archive extraction.
lock_old_archive_extraction=$lock_old_archive_extraction

# A C compiler.
LTCC=$lt_CC

# LTCC compiler flags.
LTCFLAGS=$lt_CFLAGS

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe

# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl

# Transform the output of nm into a list of symbols to manually relocate.
global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import

# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address

# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix

# The name lister interface.
nm_interface=$lt_lt_cv_nm_interface

# Specify filename containing input files for \$NM.
nm_file_list_spec=$lt_nm_file_list_spec

# The root where to search for dependent libraries,and where our libraries should be installed.
lt_sysroot=$lt_sysroot

# Command to truncate a binary pipe.
lt_truncate_bin=$lt_lt_cv_truncate_bin

# The name of the directory that contains temporary libtool files.
objdir=$objdir

# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=$MAGIC_CMD

# Must we lock files when doing compilation?
need_locks=$lt_need_locks

# Manifest tool.
MANIFEST_TOOL=$lt_MANIFEST_TOOL

# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=$lt_DSYMUTIL

# Tool to change global to local symbols on Mac OS X.
NMEDIT=$lt_NMEDIT

# Tool to manipulate fat objects and archives on Mac OS X.
LIPO=$lt_LIPO

# ldd/readelf like tool for Mach-O binaries on Mac OS X.
OTOOL=$lt_OTOOL

# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
OTOOL64=$lt_OTOOL64

# Old archive suffix (normally "a").
libext=$libext

# Shared library suffix (normally ".so").
shrext_cmds=$lt_shrext_cmds

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds

# Variables whose values should be saved in libtool wrapper scripts and
# restored at link time.
variables_saved_for_relink=$lt_variables_saved_for_relink

# Do we need the "lib" prefix for modules?
need_lib_prefix=$need_lib_prefix

# Do we need a version for libraries?
need_version=$need_version

# Library versioning type.
version_type=$version_type

# Shared library runtime path variable.
runpath_var=$runpath_var

# Shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# Format of library name prefix.
libname_spec=$lt_libname_spec

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME
library_names_spec=$lt_library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec

# Permission mode override for installation of shared libraries.
install_override_mode=$lt_install_override_mode

# Command to use after installation of a shared archive.
postinstall_cmds=$lt_postinstall_cmds

# Command to use after uninstallation of a shared archive.
postuninstall_cmds=$lt_postuninstall_cmds

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds

# As "finish_cmds", except a single script fragment to be evaled but
# not shown.
finish_eval=$lt_finish_eval

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

# Detected run-time system search path for libraries.
sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path

# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path

# Whether dlopen is supported.
dlopen_support=$enable_dlopen

# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib


# The linker used to build libraries.
LD=$lt_LD

# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds

# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds

# A language specific compiler.
CC=$lt_compiler

# Is the compiler the GNU compiler?
with_gcc=$GCC

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o