ltmain.sh

# func_warning ARG...
# -------------------
# Libtool warnings are not categorized, so override funclib.sh
# func_warning with this simpler definition.
func_warning ()
{
    $debug_cmd

    $warning_func ${1+"$@"}
}


## ---------------- ##
## Options parsing. ##
## ---------------- ##

# Hook in the functions to make sure our own options are parsed during
# the option parsing loop.

usage='$progpath [OPTION]... [MODE-ARG]...'

# Short help message in response to '-h'.
usage_message="Options:
       --config             show all configuration variables
       --debug              enable verbose shell tracing
   -n, --dry-run            display commands without modifying any files
       --features           display basic configuration information and exit
       --mode=MODE          use operation mode MODE
       --no-warnings        equivalent to '-Wnone'
       --preserve-dup-deps  don't remove duplicate dependency libraries
       --quiet, --silent    don't print informational messages
       --tag=TAG            use configuration variables from tag TAG
   -v, --verbose            print more informational messages than default
       --version            print version information
   -W, --warnings=CATEGORY  report the warnings falling in CATEGORY [all]
   -h, --help, --help-all   print short, long, or detailed help message
"

# Additional text appended to 'usage_message' in response to '--help'.
func_help ()
{
    $debug_cmd

    func_usage_message
    $ECHO "$long_help_message

MODE must be one of the following:

       clean           remove files from the build directory
       compile         compile a source file into a libtool object
       execute         automatically set library path, then run a program
       finish          complete the installation of libtool libraries
       install         install libraries or executables
       link            create a library or an executable
       uninstall       remove libraries from an installed directory

MODE-ARGS vary depending on the MODE.  When passed as first option,
'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
Try '$progname --help --mode=MODE' for a more detailed description of MODE.

When reporting a bug, please describe a test case to reproduce it and
include the following information:

       host-triplet:   $host
       shell:          $SHELL
       compiler:       $LTCC
       compiler flags: $LTCFLAGS
       linker:         $LD (gnu? $with_gnu_ld)
       version:        $progname (GNU libtool) 2.4.6
       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`

Report bugs to <bug-libtool@gnu.org>.
GNU libtool home page: <http://www.gnu.org/software/libtool/>.
General help using GNU software: <http://www.gnu.org/gethelp/>."
    exit 0
}


# func_lo2o OBJECT-NAME
# ---------------------
# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
# object suffix.

lo2o=s/\\.lo\$/.$objext/
o2lo=s/\\.$objext\$/.lo/

if test yes = "$_G_HAVE_XSI_OPS"; then
  eval 'func_lo2o ()
  {
    case $1 in
      *.lo) func_lo2o_result=${1%.lo}.$objext ;;
      *   ) func_lo2o_result=$1               ;;
    esac
  }'

  # func_xform LIBOBJ-OR-SOURCE
  # ---------------------------
  # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
  # suffix to a '.lo' libtool-object suffix.
  eval 'func_xform ()
  {
    func_xform_result=${1%.*}.lo
  }'
else
  # ...otherwise fall back to using sed.
  func_lo2o ()
  {
    func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
  }

  func_xform ()
  {
    func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
  }
fi


# func_fatal_configuration ARG...
# -------------------------------
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
    func__fatal_error ${1+"$@"} \
      "See the $PACKAGE documentation for more information." \
      "Fatal configuration error."
}


# func_config
# -----------
# Display the configuration for all the tags in this script.
func_config ()
{
    re_begincf='^# ### BEGIN LIBTOOL'
    re_endcf='^# ### END LIBTOOL'

    # Default configuration.
    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"

    # Now print the configurations for the tags.
    for tagname in $taglist; do
      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
    done

    exit $?
}


# func_features
# -------------
# Display the features supported by this script.
func_features ()
{
    echo "host: $host"
    if test yes = "$build_libtool_libs"; then
      echo "enable shared libraries"
    else
      echo "disable shared libraries"
    fi
    if test yes = "$build_old_libs"; then
      echo "enable static libraries"
    else
      echo "disable static libraries"
    fi

    exit $?
}


# func_enable_tag TAGNAME
# -----------------------
# Verify that TAGNAME is valid, and either flag an error and exit, or
# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
# variable here.
func_enable_tag ()
{
    # Global variable:
    tagname=$1

    re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
    re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
    sed_extractcf=/$re_begincf/,/$re_endcf/p

    # Validate tagname.
    case $tagname in
      *[!-_A-Za-z0-9,/]*)
        func_fatal_error "invalid tag name: $tagname"
        ;;
    esac

    # Don't test for the "default" C tag, as we know it's
    # there but not specially marked.
    case $tagname in
        CC) ;;
    *)
        if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
	  taglist="$taglist $tagname"

	  # Evaluate the configuration.  Be careful to quote the path
	  # and the sed script, to avoid splitting on whitespace, but
	  # also don't use non-portable quotes within backquotes within
	  # quotes we have to do it in 2 steps:
	  extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
	  eval "$extractedcf"
        else
	  func_error "ignoring unknown tag $tagname"
        fi
        ;;
    esac
}


# func_check_version_match
# ------------------------
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
    if test "$package_revision" != "$macro_revision"; then
      if test "$VERSION" != "$macro_version"; then
        if test -z "$macro_version"; then
          cat >&2 <<_LT_EOF
$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
        else
          cat >&2 <<_LT_EOF
$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
        fi
      else
        cat >&2 <<_LT_EOF
$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
      fi

      exit $EXIT_MISMATCH
    fi
}


# libtool_options_prep [ARG]...
# -----------------------------
# Preparation for options parsed by libtool.
libtool_options_prep ()
{
    $debug_mode

    # Option defaults:
    opt_config=false
    opt_dlopen=
    opt_dry_run=false
    opt_help=false
    opt_mode=
    opt_preserve_dup_deps=false
    opt_quiet=false

    nonopt=
    preserve_args=

    # Shorthand for --mode=foo, only valid as the first argument
    case $1 in
    clean|clea|cle|cl)
      shift; set dummy --mode clean ${1+"$@"}; shift
      ;;
    compile|compil|compi|comp|com|co|c)
      shift; set dummy --mode compile ${1+"$@"}; shift
      ;;
    execute|execut|execu|exec|exe|ex|e)
      shift; set dummy --mode execute ${1+"$@"}; shift
      ;;
    finish|finis|fini|fin|fi|f)
      shift; set dummy --mode finish ${1+"$@"}; shift
      ;;
    install|instal|insta|inst|ins|in|i)
      shift; set dummy --mode install ${1+"$@"}; shift
      ;;
    link|lin|li|l)
      shift; set dummy --mode link ${1+"$@"}; shift
      ;;
    uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
      shift; set dummy --mode uninstall ${1+"$@"}; shift
      ;;
    esac

    # Pass back the list of options.
    func_quote_for_eval ${1+"$@"}
    libtool_options_prep_result=$func_quote_for_eval_result
}
func_add_hook func_options_prep libtool_options_prep


# libtool_parse_options [ARG]...
# ---------------------------------
# Provide handling for libtool specific options.
libtool_parse_options ()
{
    $debug_cmd

    # Perform our own loop to consume as many options as possible in
    # each iteration.
    while test $# -gt 0; do
      _G_opt=$1
      shift
      case $_G_opt in
        --dry-run|--dryrun|-n)
                        opt_dry_run=:
                        ;;

        --config)       func_config ;;

        --dlopen|-dlopen)
                        opt_dlopen="${opt_dlopen+$opt_dlopen
}$1"
                        shift
                        ;;

        --preserve-dup-deps)
                        opt_preserve_dup_deps=: ;;

        --features)     func_features ;;

        --finish)       set dummy --mode finish ${1+"$@"}; shift ;;

        --help)         opt_help=: ;;

        --help-all)     opt_help=': help-all' ;;

        --mode)         test $# = 0 && func_missing_arg $_G_opt && break
                        opt_mode=$1
                        case $1 in
                          # Valid mode arguments:
                          clean|compile|execute|finish|install|link|relink|uninstall) ;;

                          # Catch anything else as an error
                          *) func_error "invalid argument for $_G_opt"
                             exit_cmd=exit
                             break
                             ;;
                        esac
                        shift
                        ;;

        --no-silent|--no-quiet)
                        opt_quiet=false
                        func_append preserve_args " $_G_opt"
                        ;;

        --no-warnings|--no-warning|--no-warn)
                        opt_warning=false
                        func_append preserve_args " $_G_opt"
                        ;;

        --no-verbose)
                        opt_verbose=false
                        func_append preserve_args " $_G_opt"
                        ;;

        --silent|--quiet)
                        opt_quiet=:
                        opt_verbose=false
                        func_append preserve_args " $_G_opt"
                        ;;

        --tag)          test $# = 0 && func_missing_arg $_G_opt && break
                        opt_tag=$1
                        func_append preserve_args " $_G_opt $1"
                        func_enable_tag "$1"
                        shift
                        ;;

        --verbose|-v)   opt_quiet=false
                        opt_verbose=:
                        func_append preserve_args " $_G_opt"
                        ;;

	# An option not handled by this hook function:
        *)		set dummy "$_G_opt" ${1+"$@"};	shift; break  ;;
      esac
    done


    # save modified positional parameters for caller
    func_quote_for_eval ${1+"$@"}
    libtool_parse_options_result=$func_quote_for_eval_result
}
func_add_hook func_parse_options libtool_parse_options



# libtool_validate_options [ARG]...
# ---------------------------------
# Perform any sanity checks on option settings and/or unconsumed
# arguments.
libtool_validate_options ()
{
    # save first non-option argument
    if test 0 -lt $#; then
      nonopt=$1
      shift
    fi

    # preserve --debug
    test : = "$debug_cmd" || func_append preserve_args " --debug"

    case $host in
      # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
      # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
      *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
        # don't eliminate duplications in $postdeps and $predeps
        opt_duplicate_compiler_generated_deps=:
        ;;
      *)
        opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
        ;;
    esac

    $opt_help || {
      # Sanity checks first:
      func_check_version_match

      test yes != "$build_libtool_libs" \
        && test yes != "$build_old_libs" \
        && func_fatal_configuration "not configured to build any kind of library"

      # Darwin sucks
      eval std_shrext=\"$shrext_cmds\"

      # Only execute mode is allowed to have -dlopen flags.
      if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
        func_error "unrecognized option '-dlopen'"
        $ECHO "$help" 1>&2
        exit $EXIT_FAILURE
      fi

      # Change the help message to a mode-specific one.
      generic_help=$help
      help="Try '$progname --help --mode=$opt_mode' for more information."
    }

    # Pass back the unparsed argument list
    func_quote_for_eval ${1+"$@"}
    libtool_validate_options_result=$func_quote_for_eval_result
}
func_add_hook func_validate_options libtool_validate_options


# Process options as early as possible so that --help and --version
# can return quickly.
func_options ${1+"$@"}
eval set dummy "$func_options_result"; shift



## ----------- ##
##    Main.    ##
## ----------- ##

magic='%%%MAGIC variable%%%'
magic_exe='%%%MAGIC EXE variable%%%'

# Global variables.
extracted_archives=
extracted_serial=0

# If this variable is set in any of the actions, the command in it
# will be execed at the end.  This prevents here-documents from being
# left over by shells.
exec_cmd=


# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
  eval 'cat <<_LTECHO_EOF
$1
_LTECHO_EOF'
}

# func_generated_by_libtool
# True iff stdin has been generated by Libtool. This function is only
# a basic sanity check; it will hardly flush out determined imposters.
func_generated_by_libtool_p ()
{
  $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
}

# func_lalib_p file
# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_lalib_p ()
{
    test -f "$1" &&
      $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
}

# func_lalib_unsafe_p file
# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function implements the same check as func_lalib_p without
# resorting to external programs.  To this end, it redirects stdin and
# closes it afterwards, without saving the original file descriptor.
# As a safety measure, use it only where a negative result would be
# fatal anyway.  Works if 'file' does not exist.
func_lalib_unsafe_p ()
{
    lalib_p=no
    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
	for lalib_p_l in 1 2 3 4
	do
	    read lalib_p_line
	    case $lalib_p_line in
		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
	    esac
	done
	exec 0<&5 5<&-
    fi
    test yes = "$lalib_p"
}

# func_ltwrapper_script_p file
# True iff FILE is a libtool wrapper script
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_script_p ()
{
    test -f "$1" &&
      $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
}

# func_ltwrapper_executable_p file
# True iff FILE is a libtool wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_executable_p ()
{
    func_ltwrapper_exec_suffix=
    case $1 in
    *.exe) ;;
    *) func_ltwrapper_exec_suffix=.exe ;;
    esac
    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
}

# func_ltwrapper_scriptname file
# Assumes file is an ltwrapper_executable
# uses $file to determine the appropriate filename for a
# temporary ltwrapper_script.
func_ltwrapper_scriptname ()
{
    func_dirname_and_basename "$1" "" "."
    func_stripname '' '.exe' "$func_basename_result"
    func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
}

# func_ltwrapper_p file
# True iff FILE is a libtool wrapper script or wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_p ()
{
    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
}


# func_execute_cmds commands fail_cmd
# Execute tilde-delimited COMMANDS.
# If FAIL_CMD is given, eval that upon failure.
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
    $debug_cmd

    save_ifs=$IFS; IFS='~'
    for cmd in $1; do
      IFS=$sp$nl
      eval cmd=\"$cmd\"
      IFS=$save_ifs
      func_show_eval "$cmd" "${2-:}"
    done
    IFS=$save_ifs
}


# func_source file
# Source FILE, adding directory component if necessary.
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)!  Also, sourcing
# 'FILE.' does not work on cygwin managed mounts.
func_source ()
{
    $debug_cmd

    case $1 in
    */* | *\\*)	. "$1" ;;
    *)		. "./$1" ;;
    esac
}


# func_resolve_sysroot PATH
# Replace a leading = in PATH with a sysroot.  Store the result into
# func_resolve_sysroot_result
func_resolve_sysroot ()
{
  func_resolve_sysroot_result=$1
  case $func_resolve_sysroot_result in
  =*)
    func_stripname '=' '' "$func_resolve_sysroot_result"
    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
    ;;
  esac
}

# func_replace_sysroot PATH
# If PATH begins with the sysroot, replace it with = and
# store the result into func_replace_sysroot_result.
func_replace_sysroot ()
{
  case $lt_sysroot:$1 in
  ?*:"$lt_sysroot"*)
    func_stripname "$lt_sysroot" '' "$1"
    func_replace_sysroot_result='='$func_stripname_result
    ;;
  *)
    # Including no sysroot.
    func_replace_sysroot_result=$1
    ;;
  esac
}

# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
    $debug_cmd

    if test -n "$available_tags" && test -z "$tagname"; then
      CC_quoted=
      for arg in $CC; do
	func_append_quoted CC_quoted "$arg"
      done
      CC_expanded=`func_echo_all $CC`
      CC_quoted_expanded=`func_echo_all $CC_quoted`
      case $@ in
      # Blanks in the command may have been stripped by the calling shell,
      # but not from the CC environment variable when configure was run.
      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
      # Blanks at the start of $base_compile will cause this to fail
      # if we don't check for them as well.
      *)
	for z in $available_tags; do
	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
	    # Evaluate the configuration.
	    eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
	    CC_quoted=
	    for arg in $CC; do
	      # Double-quote args containing other shell metacharacters.
	      func_append_quoted CC_quoted "$arg"
	    done
	    CC_expanded=`func_echo_all $CC`
	    CC_quoted_expanded=`func_echo_all $CC_quoted`
	    case "$@ " in
	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
	      # The compiler in the base compile command matches
	      # the one in the tagged configuration.
	      # Assume this is the tagged configuration we want.
	      tagname=$z
	      break
	      ;;
	    esac
	  fi
	done
	# If $tagname still isn't set, then no tagged configuration
	# was found and let the user know that the "--tag" command
	# line option must be used.
	if test -z "$tagname"; then
	  func_echo "unable to infer tagged configuration"
	  func_fatal_error "specify a tag with '--tag'"
#	else
#	  func_verbose "using $tagname tagged configuration"
	fi
	;;
      esac
    fi
}



# func_write_libtool_object output_name pic_name nonpic_name
# Create a libtool object file (analogous to a ".la" file),
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
    write_libobj=$1
    if test yes = "$build_libtool_libs"; then
      write_lobj=\'$2\'
    else
      write_lobj=none
    fi

    if test yes = "$build_old_libs"; then
      write_oldobj=\'$3\'
    else
      write_oldobj=none
    fi

    $opt_dry_run || {
      cat >${write_libobj}T <<EOF
# $write_libobj - a libtool object file
# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.

# Name of the PIC object.
pic_object=$write_lobj

# Name of the non-PIC object
non_pic_object=$write_oldobj

EOF
      $MV "${write_libobj}T" "$write_libobj"
    }
}


##################################################
# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
##################################################

# func_convert_core_file_wine_to_w32 ARG
# Helper function used by file name conversion functions when $build is *nix,
# and $host is mingw, cygwin, or some other w32 environment. Relies on a
# correctly configured wine environment available, with the winepath program
# in $build's $PATH.
#
# ARG is the $build file name to be converted to w32 format.
# Result is available in $func_convert_core_file_wine_to_w32_result, and will
# be empty on error (or when ARG is empty)
func_convert_core_file_wine_to_w32 ()
{
  $debug_cmd

  func_convert_core_file_wine_to_w32_result=$1
  if test -n "$1"; then
    # Unfortunately, winepath does not exit with a non-zero error code, so we
    # are forced to check the contents of stdout. On the other hand, if the
    # command is not found, the shell will set an exit code of 127 and print
    # *an error message* to stdout. So we must check for both error code of
    # zero AND non-empty stdout, which explains the odd construction:
    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
    if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
        $SED -e "$sed_naive_backslashify"`
    else
      func_convert_core_file_wine_to_w32_result=
    fi
  fi
}
# end: func_convert_core_file_wine_to_w32


# func_convert_core_path_wine_to_w32 ARG
# Helper function used by path conversion functions when $build is *nix, and
# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
# configured wine environment available, with the winepath program in $build's
# $PATH. Assumes ARG has no leading or trailing path separator characters.
#
# ARG is path to be converted from $build format to win32.
# Result is available in $func_convert_core_path_wine_to_w32_result.
# Unconvertible file (directory) names in ARG are skipped; if no directory names
# are convertible, then the result may be empty.
func_convert_core_path_wine_to_w32 ()
{
  $debug_cmd

  # unfortunately, winepath doesn't convert paths, only file names
  func_convert_core_path_wine_to_w32_result=
  if test -n "$1"; then
    oldIFS=$IFS
    IFS=:
    for func_convert_core_path_wine_to_w32_f in $1; do
      IFS=$oldIFS
      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
      if test -n "$func_convert_core_file_wine_to_w32_result"; then
        if test -z "$func_convert_core_path_wine_to_w32_result"; then
          func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
        else
          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
        fi
      fi
    done
    IFS=$oldIFS
  fi
}
# end: func_convert_core_path_wine_to_w32


# func_cygpath ARGS...
# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
# (2), returns the Cygwin file name or path in func_cygpath_result (input
# file name or path is assumed to be in w32 format, as previously converted
# from $build's *nix or MSYS format). In case (3), returns the w32 file name
# or path in func_cygpath_result (input file name or path is assumed to be in
# Cygwin format). Returns an empty string on error.
#
# ARGS are passed to cygpath, with the last one being the file name or path to
# be converted.
#
# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
# environment variable; do not put it in $PATH.
func_cygpath ()
{
  $debug_cmd

  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
    if test "$?" -ne 0; then
      # on failure, ensure result is empty
      func_cygpath_result=
    fi
  else
    func_cygpath_result=
    func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
  fi
}
#end: func_cygpath


# func_convert_core_msys_to_w32 ARG
# Convert file name or path ARG from MSYS format to w32 format.  Return
# result in func_convert_core_msys_to_w32_result.
func_convert_core_msys_to_w32 ()
{
  $debug_cmd

  # awkward: cmd appends spaces to result
  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
    $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
}
#end: func_convert_core_msys_to_w32


# func_convert_file_check ARG1 ARG2
# Verify that ARG1 (a file name in $build format) was converted to $host
# format in ARG2. Otherwise, emit an error message, but continue (resetting
# func_to_host_file_result to ARG1).
func_convert_file_check ()
{
  $debug_cmd

  if test -z "$2" && test -n "$1"; then
    func_error "Could not determine host file name corresponding to"
    func_error "  '$1'"
    func_error "Continuing, but uninstalled executables may not work."
    # Fallback:
    func_to_host_file_result=$1
  fi
}
# end func_convert_file_check


# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
# Verify that FROM_PATH (a path in $build format) was converted to $host
# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
# func_to_host_file_result to a simplistic fallback value (see below).
func_convert_path_check ()
{
  $debug_cmd

  if test -z "$4" && test -n "$3"; then
    func_error "Could not determine the host path corresponding to"
    func_error "  '$3'"
    func_error "Continuing, but uninstalled executables may not work."
    # Fallback.  This is a deliberately simplistic "conversion" and
    # should not be "improved".  See libtool.info.
    if test "x$1" != "x$2"; then
      lt_replace_pathsep_chars="s|$1|$2|g"
      func_to_host_path_result=`echo "$3" |
        $SED -e "$lt_replace_pathsep_chars"`
    else
      func_to_host_path_result=$3
    fi
  fi
}
# end func_convert_path_check


# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
# and appending REPL if ORIG matches BACKPAT.
func_convert_path_front_back_pathsep ()
{
  $debug_cmd

  case $4 in
  $1 ) func_to_host_path_result=$3$func_to_host_path_result
    ;;
  esac
  case $4 in
  $2 ) func_append func_to_host_path_result "$3"
    ;;
  esac
}
# end func_convert_path_front_back_pathsep


##################################################
# $build to $host FILE NAME CONVERSION FUNCTIONS #
##################################################
# invoked via '$to_host_file_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# Result will be available in $func_to_host_file_result.


# func_to_host_file ARG
# Converts the file name ARG from $build format to $host format. Return result
# in func_to_host_file_result.
func_to_host_file ()
{
  $debug_cmd

  $to_host_file_cmd "$1"
}
# end func_to_host_file


# func_to_tool_file ARG LAZY
# converts the file name ARG from $build format to toolchain format. Return
# result in func_to_tool_file_result.  If the conversion in use is listed
# in (the comma separated) LAZY, no conversion takes place.
func_to_tool_file ()
{
  $debug_cmd

  case ,$2, in
    *,"$to_tool_file_cmd",*)
      func_to_tool_file_result=$1
      ;;
    *)
      $to_tool_file_cmd "$1"
      func_to_tool_file_result=$func_to_host_file_result
      ;;
  esac
}
# end func_to_tool_file


# func_convert_file_noop ARG
# Copy ARG to func_to_host_file_result.
func_convert_file_noop ()
{
  func_to_host_file_result=$1
}
# end func_convert_file_noop


# func_convert_file_msys_to_w32 ARG
# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
# conversion to w32 is not available inside the cwrapper.  Returns result in
# func_to_host_file_result.
func_convert_file_msys_to_w32 ()
{
  $debug_cmd

  func_to_host_file_result=$1
  if test -n "$1"; then
    func_convert_core_msys_to_w32 "$1"
    func_to_host_file_result=$func_convert_core_msys_to_w32_result
  fi
  func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_msys_to_w32


# func_convert_file_cygwin_to_w32 ARG
# Convert file name ARG from Cygwin to w32 format.  Returns result in